bmw-dme-cloning-matching-cas-key-isn-service

SERVICES AND OPTIONS EXPLAINED.

Not all options apply to all services. If an option is not listed for a specific product then it is not available.

Cloning
The cloned ECU will be an exact copy of the original. No additional programming, coding (including injector coding), adaptation will be needed. For this service, we will need original and replacement ECU only. Original ECU cannot have corrupted software and has to communicate with any scan tool. This service is useful when original ECU is defective but available to read data from it.

Matching
The matched ECU will be paired with immobilizer, programmed with correct software and encoded. Matched ECU might need some service e.g. injector coding. For this service, we will need original (if available) ECU, replacement ECU, original immo box (CAS, EWS) and original key.

Unlocking - Virginising - Factory New State
The ECM will be unlocked (virgin, factory new state) just like a brand new module from the dealer. It will need to be programmed to the car with proper tools. For this option, we will need the replacement ECU only.

Immo Off - Immobilizer Delete - Free Run
The ECM will have immobilizer function disabled and will work in any car. For this option, we will need the replacement ECU only.

Add Service Key
Additional, cut and programmed, service keys will be provided. Keys will be cut from the original key. If the original key is not provided keys will be sent uncut. For this option, we will need all the keys you have (working and non working) in order not to program new keys in place of the existing working keys!

Add Remote Key
Additional, cut and programmed, remote keys will be provided. Keys will be cut from the original key. If the original key is not provided keys will be sent uncut. For this option, we will need all the keys you have (working and non working) in order not to program new keys in place of the existing working keys!

Decoding
The PIN / ISN / SK is calculated from file. This information can be used when installing the module in another car.

Tuning
Performance tuning modifies torque limiter maps, boost levels, fuel maps, ignition timing advance maps and more. All to help safely increase HP/TQ, while keeping good drive-ability and factory fail-safe protection in place. Tuning option also includes services such as DTC / CAT / O2 / DPF / SCR / AdBlue /EGR delete, additional charges may apply. Please contact us for these.

Previous article NEW SERVICE - OLDER BMW DME-EWS MATCHING